Injection Moulding
.jpg)
Crizaf parts and runner separators are an excellent way to increase productivity and lower labour costs. From the exceptionally versatile ATS Rotating Drum Separator, to models that separate even the tiniest of parts, Crizaf has the perfect separator for all of your application needs. We offer free separation tests. Send us your parts and runners and we will test them and provide you with our recommendations.
In addition to the Linear Belt Conveyor Crizaf offer a similarly manufactured incline and angle range of belt conveyors. They offer horizontal to incline conveyors with automatic belt tensioning assuring long belt life. They are designed with maximum available belt width for optimusing floor space. Crizaf also offer these conveyors with a range of platic injection moulded belts available in standard and FDA quality belts.
Single or double-station volumetric dosing units, with a throughput ranging from 0.005 up to 150 kg/h. Designed to dose masterbatch, additives and regrind into the plastification screw.
The unit can accommodate up to two independent dosing stations, which can even be of different capacities and be retrofitted to meet changing production needs. Each dosing station can be configured for individual capacities in the tens of g/h, up to 170 kg/h.
Quantum embodies innovations that radically change the way injection moulding machines and extruders are fed with blends of materials (virgin, recycled, masterbatch and additives). These innovations contribute to increasing the efficiency of production, and feature improved design, innovative technologies and high performance components, which translate into concrete advantages for the user.
The G and ESN series Hot Air Dryers are used to remove surface moisture from non-hygroscopic thermoplastic materials; suitable for applications involving high rates of material consumption. The heater, blower and control gear are fixed on the side of a drying hopper to form a single drying unit.
The ESN hot air generator is a separate unit, connected to the insulated drying hopper by using special high temperature flexible or rigid pipes.
Single desiccant tower models, with an airflow up to 80 m³/h and able to operate with Dew Point values down to –35°C. Process air temperature up to 150°C (200°C for the HT version).
By adopting the honeycomb desiccant rotor technology, the HR Series is able to ensure maximum energy efficiency and versatility of application in small and medium productions. Airflow ranging from 50 up to 300 m3/h, with constant Dew Point value. Desiccant material (zeolite molecular sieves) is coated on the internal surface of the honeycomb structure guaranteeing a large absorbing capacity and zero dust emission. Continuous regeneration process and close loop cooling phase for high performance and constant dew point level.
Silos for the storage of plastic granule and powder for the polymer industry made from aluminium or stainless steel. In recent years the introduction of recycled materials and the need for greater raw material homogeneity has led to the development of more complex silo designs. JLGoor are the only Irish based company that manage the logistics, installation and commissioning of polymer silos.
Why Use a Silo
Please take a look at this presentation to help you decide if bulk plastic storage is suitable for your factory.
Mobile Storage containers in Aluminium or Stainless Steel. Sizes range from 50 – 500kgs in standard range or anything special in between or even larger.
Control and management system for centralised feeding and conveying plants. With a single keyboard, it is possible to control all components of a transport system (outdoor storage silos, indoor silos, material distribution stations, vacuum pumps and receivers).
The lifting ring can be attached both to big bag loops and to plastic liners similarly and the system can be easily adjusted from low to high bags. The OKTOMAT® system solves material flow difficulty with common bulk material bags in industrial process.
The basic version of the OKTOMAT® system is suitable for most materials. Nevertheless there are special materials, whose characteristics have to be considered in conveying. Therefore there are a number of OKTOMAT options. Thus a corresponding discharging station can be adapted to the respective application in ideal way.
All kinds of freely flowing materials can be removed by means of vibrating suction head. Even regrind, powders, fibre and other difficult cases are possible. The suction head will balance itself in the material, loosening clusters by vibration. By means of the vibrating suction head the bulk material is loosened and can flow towards the suction area.
The lifting ring can be attached both to big bag loops and to plastic liners similarly and the system can be easily adjusted from low to high bags. The OKTOMAT system solves material flow difficulty with common bulk material bags in industrial process such as:
Octabin / Gaylord Boxes/ Super Sacks
all bags with plastic liners
BigBag
all bags with loops
Pallet cage, etc.
with plastic liners
The Rapid RG Series is specifically designed for beside-the-press recycling of hard and brittle materials. The ultra-slow rotor speed and screenless operation provide low noise level and very low dust level even with the most filled and brittle materials.
The Rapid 150 Series of low speed granulators is intended primarily for beside-the-press injection moulding applications. Immediate in-line recycling of sprues and rejects maintains product quality and eliminates the distribution and storage of waste and regrind.
The Rapid 200 Series is ideal for direct recycling of plastic waste and rejects primarily from injection moulding and blow moulding processes. No matter what your requirements, a standard model is available to suit your exact needs for capacities up to 200 kg/h.
The new 300 Series medium-size granulators are used for central or beside-the-press operation with all kinds of moulding processes. Typical waste includes sprues, runners, moulded items, profiles, smaller pipes and sheets.
The new 400 Series medium-size granulators are used for central or beside-the-press operation with all kinds of moulding processes. Typical waste includes sprues, runners, moulded items, profiles, smaller pipes and sheets.
The Rapid 500 Series large-size granulators are used for central or beside-the-press operation in all types of plastic applications. Typical waste includes large volume granulation of sprues and runners, large products like moulded items, profiles, pipes and sheets.
The Rapid 600 Series large-size granulators are used for central or beside-the-press operation in all types of plastic applications. Typical waste includes all types of large volume granulation, large products like moulded items, profiles, pipes and sheets.
The Rapid RAPTOR shredders are unique in many ways. They are designed for all types of plastics, large 1200 lit IBC containers or heavy lumps, all are efficiently recycled.
The new patented Rapid QuadCUT™ knife design offers four true cutting edges per knife in a solid piece which makes the knives the toughest you can get. The knives are clamped in a rock solid design, including a shock absorber to protect the rotor from being destroyed in a sudden impact from any metal etc. that accidentally have entered the cutter house.
The shredders come in two widths, 800 and 1350 mm. The standard version comes with FlexiPUSH (pneumatic pusher). For voluminous light weight goods, a TopPUSH (pneumatic) can be added. In case extra power is needed the PowerPUSH version (hydraulic pusher) is recommended.
.png)
Short cycle times & consistent parts quality
FANUC ROBOSHOT α-SiB takes state-of-the-art CNC precision technology from turning and milling and applies it to electric injection moulding. The results are greater acceleration, ultimate precision of movement and extremely short cycle times to produce large quantities of consistently high-quality parts.
Ultra thin magnet-box for mounting on the throat of a plastics processing machine.
The new Piovan Digitemp Thermo-refrigerators heat and cool the process circuit for injection and blow moulding machines. They integrate both temperature control and free-cooling functions, and provide water to each circuit at specific temperature (from -5°C to +90°C for every single circuit), pressure and water flow.
.jpg)
The TW, TO and TP series of Piovan mould temperature controllers has been designed to maintain at a constant temperature the mould cavities, the hydraulic oil of the injection moulding machines, the extruder screws, the calibration heads, the cylinders and calenders of thermoforming lines. Water, oil and pressurised water models operate in a wide range of temperatures, from 20°C up to 250°C.
The SLIM Series of portable chillers provide low temperature water independent from any ambient condition. The range, designed for application in all the industrial sectors, assures maximum flexibility and energy efficient functioning.
The CA Series chillers provide low temperature water independent from any ambient condition. The range, designed for application in all the industrial sectors, assures maximum flexibility and energy efficient functioning.
The pneumatic sprue pickers of the SP-IV F Series represent the first approach to the automation of an IMM. As the extraction of the sprue is guaranteed in every cycle, the separation between part and sprue will always be certain, with no need of visual checks.
The vertical entry robots of the Es II Series are particularly appreciated in the world for their very good quality-price ratio. Thanks to their high number of standard functions (operative modes) which allow to create very complex sequences, even the less experienced operator can use this robot without any risk.
XW-VI Series vertical entry robots represent the ideal solution for the handling of moulded parts. The basic model of the XW-VI series is equipped with a colour touch screen pendant and the operator can either choose the pre-set operative modes selectable from the pendant or to program it directly with free programming. This series offers many advantages like the huge potential of the controller STEC-520, extremely short extraction times, 5 CNC axis series and, most importantly, low power consumption.
ZXW-VI Series top entry robots represent the ideal solution for particularly fast production cycles.
Thanks to their powerful motors, perfectly balanced with the moving masses, it is possible to obtain extremely short extraction times of less than one second, and very accurate repeatability. A robot which can satisfy the most varied requirements of a demanding customer: open mould time (as typically required in the packaging sector) is reduced, and programming of special palletization, operations beside the IMM can be easily done.
.
If short extraction time is a must and the height of the moulding room is an issue, a side-entry robot is the perfect solution. The three electrical axis robot model TZ-1500HM guarantees handlings with a total cycle time lower than 3 seconds. The high-speed telescopic entry axis ensures an open mould time shorter than 0.7 seconds. For IMMs with a clamping force in excess of 300 ton, the S7 Flex robot is the recommended option. This side-entry model offers great flexibility and a high payload. This model is often used in IML applications and is widely appreciated for the handling of all those products obtained by multi-cavity moulds for the packaging and medical sectors, as well as in the production of disposable items
Crizaf offers a wide choice of aluminium extruded profile conveyors. The conveyors are lightweight and easy to move, yet sturdy enough for tough industrial use. All can be easily adjusted by one operator - without tools. Belts are V-guided to provide extended, trouble free performance. A wide choice of options allows Crizaf Conveyors to be customized to specifically meet your application.
Crizaf offer a range of linear and carousel type bag and box stocking systems. They can be specially tailored to suit your needs in multi-level, weighing and/or clean room configuration.
Compact design unit is for mounting on the throat of a plastics processing machine. Located here this is the best possible place to protect your machine by detecting and separating metal parts from going into your valuable processing screw.
Innovative design for installing in-line in a vacuum or pressure system pipe. The GF system will detect and separate the smallest metal parts without interrupting the draw of material. Standard range is suitable for pipe lines from 40 – 70mm OD.
Single Plate type metal detectors for installing typically on belt conveyors. They can be installed during the conveyor manufacture or retrofitted at any time.
Suitable for remote mounting or within a process for free falling plastic material like regrind to separate out and ferrous and non-ferrous metallic parts.
Tunnel type metal detectors for installing typically on belt conveyors. They can be installed during the conveyor manufacture or retrofitted at any time.
The CA Series chillers provide low temperature water independent from any ambient condition. The range, designed for application in all the industrial sectors, assures maximum flexibility and energy efficient functioning.
The unit can accommodate up to two independent dosing stations, which can even be of different capacities and be retrofitted to meet changing production needs. Each dosing station can be configured for individual capacities in the tens of g/h, up to 170 kg/h. Each dosing station is equipped with a proprietary loss-in-weight control to measure the amount of material fed by the dosing screw into the unit’s static mixer.
.jpg)
Piovans range of single phase hopper loaders for automatic conveying of granules to processing machines, drying hoppers, volumetric and gravimetric blenders. In the three phase version, they can operate independently or as part of a Piovan centralised conveying system.
.jpg)
Piovans range of 3 phase hopper loaders for automatic conveying of granules to processing machines, drying hoppers, volumetric and gravimetric blenders. In the three phase version, they can operate independently or as part of a Piovan centralised conveying system.
Win Factory is the brand-new supervisory software of Piovan for the management and elaboration of all field data from feeding, blending and drying systems, all from a remote position. Contact us for more information about this new product.
We have a team of experienced engineers who have the skill, not only to assist you in specifying equipment to meet your specific needs, but also to install and service this equipment. This typically includes primary processing machines, central materials handling systems, chilling systems, and material silos.
Injection Moulding
Robotics
Feeding & Conveying
Dosing & Blending
Drying & Dehumidifying
Granulator
Conveyors, Sprue Separation & Stocking
Magnetic Detectors & Separators
Mould Temperature Control
Process Water Cooling
Win Factory Software
Win Factory is the brand-new supervisory software of Piovan for the management and elaboration of all field data from feeding, blending and drying systems, all from a remote position. Contact us for more information about this new product.
Consumables
